PLUS Box with SNOOP. Updates Older EZ-Clones and RW4's
|1 to 4||$1,199.00
|5 or more||$1,139.05
Update your older RW4 or EZ-Clone to clone Philips Encrypted Transponder Keys.
Increase your cloning capabilities to over 500 models by integrating the Plus-Box with the RW4 or EZ-Clone. Use the latest Ilco electronic keys for cloning Philips encrypted transponders, making your cloning device even more profitable.
- View all the new applications here.
- Clone Philips (ID46) Encrypted transponder keys.
- Accurate, and easy to use.
- Easily attaches to the bottom of existing RW4 or EZ-Clone.
- No loose cables or modules to be damaged or lost.
- Serial Cable
- Power Supply
- Transponder Program Software
- Not Returnable.
9 625" Wide
6 25" Deep
1 5" High
Frequently Asked Questions on Philips Cloning
- Can the new EH3P and the existing EH3 heads be interchanged?
No. The circuit boards and communication protocol are completely different and not interchangeable.
- What is the difference between the new Philips (EH3P) Heads the electronic (EH3) heads?
The new EH3P Head is used when cloning keys for vehicles that use Philips encrypted transponder technology. The EH3 head is for vehicles that use Texas Instrument transponder keys.
- How do I tell the difference between the two different heads?
The head sizes are the same and are identified using the part number on the head. In addition, these can be identified by color; the EH3 head has a black plug and a green circuit board, and the new EH3P Head has a red plug and a red circuit board.
- How long will it take to clone this style of key?
Typically it takes 1-2 minutes at the vehicle using the SNOOP, and an additional 2-3 minutes to clone the key.
No. The technology required to clone these keys has surpassed the capability of the RW2 and RW3.
- Can units prior to the RW4 be upgraded to clone Philips electronic keys?
- What equipment must I have to program the EH3P keys?
You will need the new RW4 Plus and a SNOOP or the Ilco EZ-Clone and a SNOOP. Existing RW4 and EZ-Clone units may be upgraded to clone EH3P keys with the addition of a Plus-Box and SNOOP.
- What is a Plus-Box?
It is a module that was developed to add the capacity needed to an existing RW4 or Ilco EZ-Clone so it can program Philips encrypted transponders.
- How does the Plus-Box work?
It attaches to the bottom of an RW4 or Ilco EZ-Clone and is connected electronically in the back of the units. The combination of the two pieces gives the existing tool the capacity to perform all the programming functions of an RW4 Plus or Ilco EZ-Clone Plus.
- What is a SNOOP?
The SNOOP is a small device that collects the information from the vehicle and allows it to be transferred to the cloning machine and then onto the new key. The Philips systems have a "cross learn" function. This means that the vehicle learns from the key and key learns from the vehicle. To complete this process, it will require a trip to the vehicle and the use of a SNOOP.
- How do I get a SNOOP?
The RW4 Plus, Ilco EZ-Clone Plus and the Plus-Box each include a SNOOP.
- Will I need to connect to a PC and the Internet?
No PC or internet connection is required for cloning keys.
- How many new applications will I be able to clone with the new Ilco Philips Cloning System?
There are approximately 20 makes and 435 new models that are cloneable with this system. Many of them are very popular, including many General Motors, Chrysler family and Honda vehicles, plus much more. This will take your cloning capabilities from approximately 65% of the vehicles on the road to approximately 90%.
- What battery is used in the EH3P Heads?
The head utilizes the same "off the shelf" CR1632 Lithium battery as the EH3 head.
- How many new key blades are available for this system?
- How are the new blades identified?
The letters R through X are stamped just below the U-shaped bow and the blade part number is molded in the plastic bow for easy identification.
Made with Price in the U.S.A.